Gas solenoid valve installation and use precautions

1. When installing, it is advisable to select a horizontal pipe section with less vibration.

2. The parameters on the solenoid valve label should match the actual requirements.

3. The arrow direction on the solenoid valve body should be consistent with the flow direction of the medium.

4. To ensure the normal use of solenoid valve, please install a gas filter in front of the valve.

5. Thoroughly purge the pipe before installation to prevent foreign matter from damaging the diaphragm and causing the solenoid valve to malfunction.

6. If it is installed outdoors or in a bad environment, it should be correspondingly protected.

7. When the solenoid valve fails, it is recommended to install a bypass device for timely isolation and easy maintenance.

8. If the valve fails to open and close during using, check whether the coil is power off, whether power supply and pressure are normal.

9. When the solenoid valve is not installed temporarily, it can be stored in indoor under 0-40℃ relative humidity of 80% or less. It is not allowed to be stored in the open air.