Dual Modular Solenoid valve

Description:

//  The dual modular solenoid valve consist of two safety shutoff valves in one compact fitting：

// Solenoid shutoff valves as per DIN EN161 Class A Group 2

// Two A valves in one compact body

// Two valve blocks

// High flow rate

// Max pressure 500mbar

// Fast closing

// Fast or slow opening, with fast initial gas allowance

// Main volume adjustable

// Flexible combination between flange and thread

// Applicable to gases, such as natural gas, methane, LPG and so on

// Blue signal light indicates working status

// Compact and light weight

LCV-D:

Two solenoid valves, both are fast opening and fast closing with main volume restrictor at V2 to adjust flow rate.

LCV-DLE:

Two solenoid valves, V1 is fast opening and V2 is slow opening. Both opening time and main volume can be adjusted at V2. 

Technical Data:

Max working pressure: 500mbar (50Kpa)

Valve V1: Solenoid shut-off valve as per DIN EN161 Class A Group 2

Valve V2: Solenoid shut-off valve as per DIN EN161 Class A Group 2

Closing time：＜1s

Opening time：

LCV-D＜1s

LCV-DLE = about 15s at +20℃ without initial lift

Initial lift：Adjustable for LCV-DLE

Main Volume：Adjustable at V2 for both LCV-BD and LCV-BDLE

Material：

Valve Body: Brass, Steel, Aluminum Alloy 

Sealing: NBR for G260/1 gases

Temperature: -12℃ to +60℃

Installation position: Vertical or horizontal 

Filter: Built-in filter screen, proper filter should be installed;

Sensors or detectors connection: G1/8 as per DIN ISO 228 at the inlet end of V1, between V1 and V2, and at the outlet end of V2 

Voltage/Frequency: 50/60Hz，230V±15% (others can be customize)

Working time: 100% of all time

Protection: IP54

Electrical connection: As per DIN43650

Interference: Degree N