Description:
Gas MultiBloc/Functicon Solenoid valve intergrades filter, regulator, valves and pressure sensor in one compact fitting.
// Filter
// One regulator and two valves: BO1
// One valve is fast opening and one valve is slow opening
// Solenoid valves up to 360mbar as per DIN EN161 Class A Group 2
// Sensitive setting of output pressure by regulator as per DIN EN88 Class A Group 2
// High flow rate at low pressure drop
// DC Solenoid drive interference degree N
// Main Volume/Flow restrictor at V2
// Flange connection with pipe threads as per ISO7/1
// Applicable to gases, such as natural gas, methane, LPG and so on
// Blue signal light indicates working status
// Simple mounting, compact and light weight
Description:
// The dual modular solenoid valve consist of two safety shutoff valves in one compact fitting：
// Solenoid shutoff valves as per DIN EN161 Class A Group 2
// Two A valves in one compact body
// Two valve blocks
// High flow rate
// Max pressure 500mbar
// Fast closing
// Fast or slow opening, with fast initial gas allowance
// Main volume adjustable
// Flexible combination between flange and thread
// Applicable to gases, such as natural gas, methane, LPG and so on
// Blue signal light indicates working status
// Compact and light weight
Opening Time: less than 1 second
Closing Time: less than 1 second
Numbers of operations: 20 per minute.
DN10-25 360mbar：DN32-50 200mbar
Max working Pressure: 200/360mbar
By-pass ports are set on both sides of the valves,
with diameter of G1/4”
Inside filter net
Protection: IP54
Sealing material: chemigum
Body material: aluminum alloy
Pressure steel spring AISI 302.
The ambient temperature: -15℃- 60℃
Coil temperature: 65℃
Opening Time: less than 1 second
Closing Time: less than 1 second
Numbers of operations: 20 per minute.
Max working Pressure: 200/360mbar; DN32-50 200mbar
By-pass ports are set on both sides of the valves, with diameter of G1/4”
Built-in filtering
Protection: IP54
Sealing material: Nitrile rubber
Body material: aluminum alloy
Pressure steel spring AISI 302.
The ambient temperature: -15℃- 60℃
Coil temperature: 65℃
Opening time <1 seconds
Closing time <1 seconds
Maximum operating frequency: 20 times per minute
Maximum working pressure: 500 mbar
Equipped with G1/4 aperture bypass hole
Built-in filter
Protection level ：IP54
Sealing material: Nitrile Rubber
Technical parameter
Opening time 1-30 seconds adjustable
Closing time < 1 second
Maximum operating frequency:20 times/min
Maximum working pressure:
DN 10 - 25 360 mbar；DN 32 - 50 200 mbar
With G/4 aperture bypass hole
Built-in filtering
Protection level:IP54
Technical parameter
Opening Time: less than 1 second
Closing Time: less than 1 second
Maximum operating frequency: 20 times per minute
Maximum working pressure: atmospheric pressure 20-25 360 mbar; high pressure
By-pass ports are set on both sides of the valves, with diameter of G1/4”
Inside filter net
Protection: IP54
Sealing material: nitrile rubber
Body material: aluminum alloy
Pressure steel spring AISI 302.
The ambient temperature: -15℃- 60℃
Coil temperature: 65℃
Technical parameter :
LVC-FS series solenoid valve
Opening time < 1 second
Closing time < 1 second
Maximum operating frequency: 20 times/min
Maximum working pressure: DN10-25 360mbar;DN32-50 200mbar
With G1/4 aperture bypass hole
Built-in filtering
Standard and certification:
"A" standard
Meets European gas standards
CE certification
Electrical specification
Rated voltage:50/60Hz，230Vac、110Vac、24VDC(And other specific)
■ Suitable for various gasses, including Natural gas, Propane and LPG Gas;
■ All our products has passed CE certificates with test reporting, which are according to the Low Voltage Directive 2014/35/EU (LVD) and Electro Magnetic Compatibility 2014/30/EU (EMC) .
Brand: LENC
Origin: China
Copyright © Guangzhou Liancheng Energy Technology Development Co. Ltd. All Rights Reserved. Sitemap | Technical Support:
